There are many things which can contribute to sewage flooding, which means that sometimes this situation is unavoidable. When the sewer system becomes overloaded with large amounts of rainwater during heavy rainfall then flooding is highly likely.

If you ever spot any surface water flooding in your street or coming from the drains then you can get in touch with your regional water company who will usually send drainage engineers to sort out the problem as soon as possible. Drainage maintenance may be a necessity to stop it from affecting properties in the area.

However, the sewer flooding can often impact on residential areas and so you may need to call a drainage contractor to visit your home and perform emergency repairs and maintenance work to ensure the wastewater does not pose a health risk and serious hazard.

Sewer blockages can cause havoc in certain areas which are prone to this type of flooding so it is worth considering preventative measures where this becomes a growing issue.

The main thing to suggest is to contact the professionals in the first instance you notice flooding as drain inspection may be required. As well as tackling the problem, they will also be able to look at ways of stopping this from happening again in the future.

Some blockages found within drainage pipes should be left to the specialists to clear, but there are many uncomplicated problems around the home which could be sorted quite easily. One of these is when you find that the trap below the kitchen sink has become blocked due to the build-up of fats and food deposits.

A homeowner can clear the blockage by simply following the instructions below.

If the waste trap under the sink has been blocked in the u-bend then you need to get a bucket with which to empty the wastewater into. Once you have done this then fill up a kettle with warm water and then pour it into the plug hole in the sink, being sure to be careful when handling hot water.

Most blockages will be broken down by the warm water action and the food waste will clear. In cases where the trap is still not allowing water to freely pass through it, then the plug hole may need to be gently plunged using a plunger.

Should you need any more help, you can always choose to contact a drainage contractor. An engineer will be able to inspect the issue and advise on what needs to be done. A fat trap is always recommended so that these kinds of blockages do not happen again in the future.

There are many things which can contribute to the flooding of drains and environmental pollution, but some of these can be avoided if people just took a little time to consider drainage around their home.

It is easy to assume that all river pollution happens due to local industries depositing waste materials rather than the plumbing in our properties. However, it is a real situation that wastewater from household appliances, toilets, sinks and baths can cause health hazards to local wildlife instead of ending up in the sewage treatment works as it should do.

The devices and appliances you have fitted in your home should be connected in the right way and you also need to make sure that disposable products are not discarded through the drainage system either.

Wastewater passes through a complex network of sewers and drains, but any blockages encountered along the way to the treatment works can cause many problems for water companies and drainage contractors alike who have to remove blockages from the pipes every day.

Some drainage maintenance works are a necessity, but over two thirds of the blockages found in sewers are found to have been caused by people putting items down the drains that really need to be bagged and binned instead.

We have already reported the news that a new law is to come into place from 1st October this year which will affect the ownership of sewer and wastewater pipes and where they are located. For homeowners, this can depend on the type of property they live in and when it was built.

What it means in practice is that should you find a blockage in the drains outside your property boundary, you may not be responsible for sorting the problem out any longer. It all refers to how the pipes connect to the main sewerage system and who should arrange for the drainage maintenance work to be done.

From the date above, the water company in your local area will have greater responsibility for the flow of wastewater from sinks and toilets through the pipes and into the sewers. However, this law change only applies to pipes outside the land you own which connects to the public sewer system.

Therefore, you will still have to ensure that the pipes within your property boundary are working as they should by carrying wastewater towards the public system. Any pipes connected to a private pumping station will remain the ownership of the person the land belongs to. It is still wise to consult with your drainage maintenance contractor to find out where the responsibility lies should you ever need to report a blockage.

In this day and age, with all the many improvements in drainage technology, it is becoming increasingly common for trenchless techniques to be deployed by specialist engineers to deal with severely damaged pipes and drainage systems. However, there are still instances where traditional trench excavation work is necessary.

Should it not be possible to repair the pipes or drains using these modern methods, then new pipes may have to be installed in the street or area where the project is located, by digging up the surrounding soil to access the pipework.

If you use an established drainage contractor for your public or private sector drain maintenance work, you can be sure that the team of engineers taking on these big contracts will be highly trained individuals with experience of working within confined spaces as well as on the public highway. They will also look to carry out the work with the minimum amount of disruption.

All health and safety regulations will be met and the excavation personnel will always carry out risk assessments and plan the work thoroughly before the installation of the replacement pipework begins. So be careful when selecting a contractor that is able to meet all these requirements.

As well as being able to maintain all drainage maintenance works, if you enlist the services of a leading drainage contractor you may also be able to benefit from their access to high performance equipment such as a combination tanker with jetting and vacuuming capabilities.

The advantages to clients include being able to handle all kinds of waste, such as that deemed to be hazardous. This requires the handler to be registered to undertake this type of work and all the documentation that goes with it. The Environment Agency is very strict on the way that waste should be disposed of these days.

By making good use of a combination unit, this can take care of any root cutting, culvert cleaning, septic tank emptying, interceptor cleaning, gully emptying or sewer cleansing requirements you might have. An all-round machine such as this one is able to take on these multiple tasks.

Get in touch with the specialists to discuss your needs as they will be able to carry out this maintenance work, leaving you to concentrate on your business operations. Equipment like the combination tanker is able to save your costs as the time it takes for an engineer to undertake all this work is significantly reduced.

When a blocked drain is posing so much of a problem that it is affecting your business operations, it is important to address the situation before it creates an even bigger disruption for you. As well as the inconvenience aspects, it can also become a serious risk to your health and any other people present in the building. In these kinds of situations it is crucial that you can call on an emergency drainage contractor for assistance.

No matter what the problem is, the specialists at a dedicated company offering drainage maintenance services will be able to speak to you about the issue, diagnosing what the fault is and arranging for a response team to visit your premises straight away.

Once the qualified engineers have located the blockage, they will be able to set to work resolving this situation, quickly and efficiently. You can be sure that the equipment available to these professionals will be up-to-date and they can utilise the latest drain maintenance techniques to deal with even the most difficult of blockages.

Emergency drainage contractors are available 24 hours a day, all through the year, so you can rest assured that the situation will be resolved to your satisfaction.

If the specialists called in to inspect your damaged drainage pipes, find that they are beyond repair, then the latest trenchless technology techniques can be used to install new pipes without the need for excavation.

In the past, this was the only real way for work to be done on pipes that could not be repaired. The road or area around the drainage system would have to have been dug up in order for the new land drains, supply pipes or pumped drainage lines to be laid down successfully.

The specialist team of engineers can now utilise impact moling to install new pipes. This method is extremely cost-effective and it can also save time too. A pneumatic piercing tool is put into action to compact and displace the soil instead of having to remove it completely.

A drainage contractor will implement this impact moling technique as it is less expensive than the old trenching methods and it also has low operational costs as well. The fact that it hardly disrupts the environment surrounding the pipes means that customers are satisfied with the work. The only time when this method is not really suitable is when the conditions are rocky.

When you enlist the services of a professional drainage contractor, they will have access to some of the very latest technology – including the ability to carry out CCTV drain surveys.

A survey such as this is able to provide detailed drain inspection. This means that whether the pipe or drain system is above or below ground (where it is not readily accessible for engineering repair work), the camera equipment will survey the scene, allowing the teams to find and identify any areas posing a problem.

This professional service utilises equipment which can scan bore pipes of varying sizes and examine exactly what is going on in there. Technology such as this is able to get to the root of the problem fast, thus saving a fair amount of money, not to mention effort too.

Once the site inspection work has been completed by the CCTV cameras used in the survey, the results will be displayed in the form of a report which is given to customers, along with full colour images showing them the precise conditions of the drains. The summary outlines any repair works which are recommended.

If given the go ahead, the drainage engineers will then get to work on repairing the pipes and lining them so the issue does not return again anytime soon.

There are many instances where a toilet can become blocked and if not addressed, the issue can escalate and even cause the flooding of the home. We do not need to remind you of the health risks and unpleasantness caused by wastewater flowing back up the pipes and into the bathroom. This can make the area unusable until the situation is cleared by professionals.

In order to prevent this from happening it is necessary to perform maintenance on the toilet from time to time. To do this, all you need is a large rubber plunger which is quite easy to get hold of and can be bought from any DIY shop.

So when too much paper has been used in the toilet, you can tell it is becoming blocked as flushing it does not do anything to remove it. This is where the plunger comes in as this implement can usually clear most common paper blockages.

You can achieve this by fitting the plunger around the outlet at the lower point of the toilet pan before thrusting it in a downwards motion. Hopefully this should work to clear it and then you can flush water through the soil pipe to make sure.

If you have any further problems, then it may be wise to consult the professionals.